You can do the wings as you like, but an idea is to cut out 2 appropriately-sizes half circles, and then cut “flaps” out of the straight sides, to make feathers. [4] X Research source
Put newspaper down so you don’t stain your workstation Stick a toothpick to hold the ball while you paint it. Make the coats light so that the paint doesn’t melt the styrofoam. Let it dry.
Make sure the wings are perfectly opposite one another on the ball. If the stems of the feathers are strong enough, they can be stuck directly into the styrofoam, without the need for glue.
Cut about four inches of wire for each wing using wire cutters. Bend the wire using wire cutters into the shape you’ve drawn for your wings. Twist the two ends of the wire together into a tight coil.
Alternatively, you can use tissue paper. Push a sheet of tissue paper onto the glue-coated wire, and then cut it down to size.
Make sure the wings are on opposite sides of the ball. If your ornament is made of glass and not plastic, you might need to use something other than super glue, like fabric glue.
