Include your pet’s name and its birth/death date as appropriate. You could also include a saying, such as “In Loving Memory of Our Favorite Furry Friend. "
Print out the design. If it’s bigger than a single page, you’ll need to print it across several pages and tape it together. Then, wipe the tile clean with glass cleaner or alcohol. To create a stencil on the tile, apply contact paper to the tile, working from one edge to the other to stick it down. Place the design on top of the paper and tape one edge down. Lift the paper up and spray the top side of the contact paper and the bottom side of the printed page with spray adhesive. Smooth it out over the tile. Cut the design out with a craft knife, removing the black parts and leaving the white parts behind on the tile. You could also use a computerized cutting machine to cut out a stencil.
To use a sandblaster, place the tile in your sanding blasting case and then go over the stenciled tile you made with the sandblaster to take off the top layer. [5] X Research source If you don’t have any of these tools, you can paint on the tile with acrylic paint.
Use an acrylic paint or other type of paint meant for tile. If you made a stencil, you could also use spray paint.
If you don’t want to use a rock or concrete marker, just dig a shallow area for the tile and set it in the ground.
Take the pieces out once you like the arrangement.
You’re aiming for mortar the consistency of peanut butter. Use cold water to give yourself more time to work with the mixture, as it slows down the drying time.
Get the top as smooth as you can since that will be the face of the marker.
You can use a ruler laid across the top of the mortar to create straight lines as needed. Spray the plastic letters with cooking spray to help them release from the concrete. You may need to tap the letters in gently with a hammer. At this point, you could also add in decorations, such as small glass marbles or trinkets. Just press them into the concrete. If you mixed your mortar thick as suggested by the bag, you’ll have as little as 30 minutes to do this. If your mortar is fairly wet, you may have 1-2 hours.
Peel out the cardboard letters and foil if you used them.
If you paint your project, you may want to add a waterproof spray sealer at the end. Pick a polyurethane sealant and add 5 thin coats, letting it dry in between.
You could even write on the brick with a permanent marker instead. Just be sure to use a sealer at the end.
Its growth will remind you of your pet for many years to come! Pick something that grows well in your area. Ask at a local nursery if you’re not sure.
You could also use solar lights or garden accents.
